- #Hp ucmdb installer user interface mode not supported install
- #Hp ucmdb installer user interface mode not supported password
Let’s start with more simple option of having Scripted Installation with local answer file Or local path can be used instead, for example, optical or USB flash drive. One option is to use a network destination, such as Web, FTP or NFS server. Boot options promptĪt this stage you need to point installer to the path where configuration file is saved. The automatic boot will be stopped and CLI-prompt with “cdromBoot runweasel” pre-typed should appear. Press “Shift + O” within 5 seconds to Edit boot options, as shown in Figure 3. Then choose to start installation (instead of booting from local disk). Installation from physical media, the first steps are the same as in interactiveĭuring the server start-up, select either optical or USB drive to boot from.
Scripted installation can be used with DVD/USBįlash media or PXE over-the-network deployment. # Set the network to DHCP on the first network adapter
#Hp ucmdb installer user interface mode not supported install
Rootpw Install on the first local disk available on machine
#Hp ucmdb installer user interface mode not supported password
# Set the root password for the DCUI and Tech Support Mode
# Accept the VMware End User License Agreement I will be using default configuration script, which performs installation of ESXi on the first disk, overwriting it and sets root password to As this file will be stored in clear text, the password should be changed immediately after the installation. Instead you can create an answer file which will have all the required Installation of multiple hosts without having to go through the setup prompts. Will ask to remove the installation media and to reboot the server. Once installation is completed, the installer Select local disk for ESXi installationĮnter a root password. Unless you are performing an upgrade, all data on the disk will be removed. You will need to select the local disk you want to install ESXi on. Interactive installationįor the interactive installation boot the server from optical or flash drive and go through the setup prompts. There are also utilities for Windows that can convert ISO to bootable USB, for example, rufus ( link). To create bootable USB device on Linux follow this procedure ( link). If you use a server with integrated management software, such as HP ILO or Dell DRAC, you can use virtual drive to mount ISO file over the network. Create a bootable optical disk (CD or DVD) or bootable USB flash drive.